How can I configurate VLAN of the H3C S5500-28C-EI

Question 1: Does the H3CS5500-28C-EI(HP JD377A ) has the function of WEB?

Question 2: Has setted the IP address, it saied that: port GigabitEthernet1/0/1, meaning the port settings to the designated VLAN, setting up the command, not be the intranet, which port should be?

Answer 1 ：No.

Answer 2：The three layer switch sets IP address is to create a VLAN, the virtual interfaceand then enters into the corresponding VLAN, configure the IP address in the VLAN virtual interface,

For example, your computer is connected to the S5500-28C-EI port of the G1/0/13 H3C, you configure a VLAN 10, then create a interface VLAN 10, into the interface VLAN 10, IP address, such as: 192.168.1.1/24, interfacegigabitethernet 1/0/13 finally entered into the VLAN, the G1/0/13 10192.168.1.0/24 network, computer configuration of your IP, you can pingthrough this H3C S5500-28C-EI

Below is the full command:

VLAN 10

Quit

Interface VLAN 10

IP address 192.168.1.1 255.255.255.0

Quit

Interface gigabitethernet 1/0/13

Port access VLAN 10

Quit JD370A price

Then the computer network card IP configuration for the 192.168.1.2/24, Ping192.168.1.10. 

Source: http://www.h3network.com/hp-jd377a-s5500-28c-ei-price_p22.html