HP released the management tool: OneView

IT administrators, HP and bring you a new tool, JF229A can easily help you to finish the work.

On September 26th, HP officially announced the release of a new OneView management platform, specifically for HP BladeSystems and ProLiant Gen8 and G7 server. HP said, this platform management tools can greatly shorten the preparation time, but also easy tomanagement.

According to HP said, developed the software takes about four years, many of its functions are from more than 30 customer requirements.

HP fusion system managing director Jeff Carlat said to reporters, with the passage of time,the OneView will "replace inheritance tools, such as Virtual Connect Enterprise Management,Insight Control and Systems Insight Manager. In the existing main problems of inheritancetools, they are only responsible for the management of equipment, and can't help IT managerto finish all of their demands and tasks."

We can be sure of is, equipment management is the management tool of the meaning of existence, but in addition, HP also for these software tools to add some gorgeous coat, such as easy to use user interface and the social function and so on, so obviously, the future development trend of management tools will be the template, and real-time analysis typicalmanagement union.

OneView the use of "no proxy analysis" to move information from the server. Monitor the whole working through control integrated remote Gen8 ProLiant server (iLO4) chip and software to realize, the remote control software can be directly sent to the server SNMP trap,no need to install any proxy to the server operating system.

OneView can also server configuration for the virtual machine and software, in addition, italso embeds a technology, which allows the administrator to grab at the server or the event specific information through the use of a similar to Google's search engine, the search engine can also through the user input the content for the user to provide relevant searchsuggestions.

HP converged infrastructure and chief technology officer Bryan Jacquot said in an e-mail toreporters: "the user can choose the installation without agent management service in theoperating system, in order to promote the special operating system data additional to the iLOmigration, but HP OneView only through the network management and iLO4 interworking, but not directly and operating system implementation communication."

HP OneView management tool

At the same time, HP also developed a set of named MapView mapping technology, allows the user to set the preset infrastructure, implemented in Amazon Web on the Servicesfunctions such as Madeira Cloud, which mark the connection between equipment andequipment you, and offer some possible lighting control.

OneView also comes with a SmartSearch search technology, the software based on the Apache Lucene, designed to help managers to quickly find relevant server information. AndGoogle search, OneView search will provide search suggestions according to the inputinformation for administrators, HP says the response time for the search suggestions will be 200 milliseconds.

This technology is a component contains a set of social features the new "individual oriented"technology, in this regard, HP specially set up a forum, IT managers can to the Forum on how to deal with the problem effectively and use of equipment to share tips and tricks. This way with other online information gathering methods (such as StackOverflow), the biggest difference is that it allows the user to upload all kinds of profiles JF816A and help guide in the forum.

 More information, please view: http://www.h3network.com

HP next generation firewall: help enterprises expand the network threat protection ability

On September 26th, Hewlett-Packard Co HP JD370A  announced the launch of the new HP TippingPoint next generationfirewall (NGFW) series of products, in order to help customers defense mobile applications and cloud computing brings the threat.

With the launch of five new products, HP extended network security product combination, to help enterprises in the network before the invasion attack.

The next generation of IT model under state protection

As the cloud, mobile and onboard equipment work (BYOD) technology demand growth,enterprises must be fully prepared to respond to the changing work environment brought about challenges and risks. The "IT shape" enterprise more deeply integrated IT solution, ininteraction with user level security threat. The risk of HP TippingPoint NGFW aims to help enterprises cope with the following trends bring:

The new way of cloud computing introduces access outside the enterprise application,business must be with the enterprise cloud applications, such as software as a service(SaaS) for the protection of interaction and the cloud storage of. HP TippingPoint NGFW provides application control and visibility precision, such as intellectual property may bebeyond the scope of the enterprise policy allows, it can help the enterprise to restrict certainemployees regular access to cloud file transfer applications.

Mobile computing brings visibility and control a wide range of application requirements,access to these applications no matter where, enterprises must prevent potential virus infection, and vulnerability caused by the mobile device remote access to the enterprise network staff. HP TippingPoint NGFW can export to intercept function automatically blockingmay enter the network contact and malicious code, thereby preventing sensitive datasecretly leaked to the command and control destination known.

BYOD policy allows individual devices entering the workplace, to ensure that employeesefficiently and actively work. However, the devices are located in the edge of the network, andbeyond the control of the traditional IPS system. To enable the network to the potential threatdefense of these devices, the enterprise must be deployed properly, can play the role ofcontrol measures in the network edge. HP TippingPoint NGFW provides precise controlpolicy, interactive information management Facebook, Google and Twitter and other popularconsumer applications.

HP TippingPoint NGFW series products

Extension of the HP industry-leading portfolio of HP TippingPoint NGFW can provide the following five types of products:

HP TippingPoint the next generation S1050F firewall with 500Mbps throughput, connection and 250000 concurrent, can be used for branch network deployment.

HP TippingPoint the next generation of throughput and 500000 /100 S3010F firewall and 3020F have 1Gbps/2Gbps million concurrent connections, and can be used for branch and campus network deployment. .

HP TippingPoint the next generation S8005F firewall and S8010F has the throughput of 5Gbps/10Gbps and 1000/2000 million concurrent connections, for the core and data centernetwork deployment.

Network security need active intrusion prevention measures and effective network visibility,and focuses on the analysis of network traffic and user behavior pattern. By making full use of the HP TippingPoint safety management system (SMS), the leading HP TippingPoint next generation intrusion prevention system (NGIPS) management, firewall products newcentralized management to the data center from the edge of the network, in order to protect the data, application and user. This set of complete product portfolio also make full use ofTippingPoint from HP DVLabs and Zero Day attack defense program (Zero Day Initiative(ZDI)) senior security research results and the HP TippingPoint ReputationDV feeds, whichtake the initiative to identify new threats and attacks from the known attack JD370A command and control center.

More: 

http://demoploo.tumblr.com

VLAN of H3C three switch

Ethernet frame of traditional adds 4 bytes of 802.1Q tags, HP JD374A as a VLAN tag afterframe

Vlan id=0 for the identification of priority, VLAN id=4095 as the reserved values

IEEE 802.1Q defines a new field, is used to identify the Ethernet framebelongs to VLAN, the field is added in the etheric

After the network frame of the MAC source, the TPID contains a fixed value:0x8100

Port of port VLAN known as the default VLAN, also known as the default all ports of the PVID default value is vlan1

Allow only the Ethernet frame by default VLAN port called access port, Access port after receiving the Ethernet frame type VLAN label, VLAN label forwardinga port is stripping. Allow multiple VLAN frame through a port called Trunk port

PVID is set in a fixed label port, for some VLAN on the switch does not play tagcan then

The Hybrid port can be used for the interconnection between the switches, can also be used to connect the terminal host or router equipment

Common VLAN division (order matching):

Based on the MAC address of the VLAN, based on IP network VLAN protocolbased on VLAN port based VLAN

Technology of dynamic VLAN configuration of general GVRP (GARP VLANGeneric Attribute Registration Protocol)

GVRP multicast destination MAC address: 01.80.C2.00.00.21

GVRP port registration modes: Normal mode, Fixed mode, Forbidden mode

GARP timer: timer Join timer, Hold, Leave, LeaveAll timer timer

Vlan basic configuration: VLAN XX (to create VLAN), port interface-list (port),

Port based on VLAN XX

Port Ethernet x/x

In view of port link-type trunk interface (port link type trunk)

Port trunk peimit VLAN XX (allows the VLAN through the current trunk port)

When implementing the undo VLAN command to delete the VLAN is the defaultVLAN port, Access port for the default VLAN back to VLAN 1, the Trunk and Tybrid ports, the port will not change the default vlan.

The VLAN function can only be MAC address configuration in port based onHybrid

Mac-vlan mac-address xxxx-xxxx-xxxx VLAN XX (VLAN and priority of the corresponding MAC address configured)

Interface port link-type hybrid views

Port hybrid VLAN XX XX untagged (allows you to specify the VLAN through theHybrid port)

Mac-vlan enable (open port MAC VLAN function)

The basic configuration of GVRP

[Switch]gvrp (open global GVRP function) [Switch-ethernet1/1] GVRP (portGVRP)

Must first open the global GVRP function, can open the port function of GVRP(must be trunk port)

Configure the GVRP timer

[Switch]grap timer leaveall (default 1000 seconds)

[Switch-ethernet1/1] GVRP timer {hold 10 |join 20 |leave per second JD373A persecond 60 seconds}

more: 

http://www.blogigo.co.uk/h3cproducts

HP ProLiant DL380 G6 server automatically restart fault solution

The solution：

For the HP ProLiant DL380 G6 server accidental restart, HP JC694A  please use the online update component update system HP ProLiant DL380 G6 programmable logic device.

Important information: when the system online update component - can be completed inprogrammable logic device operation, please unplug the power line of server, prior to reconnection to wait at least 30 seconds.

If the update component - running online system programmable logic device when systemoccurs following similar fault, please run the online update components:

Before running the online update the assembly, not unplug the power line.

If after running the online update component fault has not ruled out, please contact the "solution" part of the bottom details of HP's customer support staff:

For Windows Server, online Windows oriented update component - system programmable logic device (HP ProLiant DL380 G6 Smart Component cp012068) can be found in the following:

Note: you must install the iLO 2 firmware version 1.77 (or later), with online Windows oriented operation update component - system programmable logic device (HP ProLiantDL380 G6).

Windows oriented ROM online update component - HP Integrated Lights-Out 2 was released on the web site:

Http://www.hp.com/swpublishing/MTX-057752ceaf4247fe98b111f0a7

Click the "Revision History" (version history) to get the latest version.

For Linux, the online update component - oriented Linux system programmable logic device(HP ProLiant DL380 G6) released in the following:

Note: you must install support for iLO / iLO 2, and iLO 2 firmware version 1.77 (or later) HPProLiant Channel Interface Device Driver, the online Linux oriented operation update component - system programmable logic device (HP ProLiant DL380 G6).

Linux oriented ROM online update component - HP Integrated Lights-Out 2 was released onthe web site:

Http://www.hp.com/swpublishing/MTX-a1f04ca32eb34e1db2a081bafa

Click the "Revision History" (version history) to get the latest version.

Many versions of Linux HP ProLiant Channel Interface Device includes Driver (hp-ilo). If thedriver does not include the Linux version, you can download from the HP website.

Perform the following steps, to obtain support for iLO / iLO 2 HP ProLiant Channel InterfaceDevice the latest version of Driver:

Click the following url:

Http://welcome.hp.com/country/us/en/support.html? PageDisplay=drivers

In the "for enter a server name product" field, click search.

Select the corresponding operating system.

Select "Driver - Lights-Out Management" category.

Support the iLO / iLO 2 HP ProLiant Channel Interface Device Driver instructions next to "Download" (download) button.

For the operating system Windows Server or Linux, JC694A  please contact HP customer support staff.

More information, please view: http://www.h3network.com

How to buy the HP server, tips

Many of my friends to buy the HP server, HP JC694A  it is easy to encounter the problem , HP server can be inserted double CPU, and the machine comes with only 1, would you like to two?HP server can be inserted 18 memory slots, but bought HP server only two slots,need not to need to upgrade to the memory 18?

HP server can be inserted 8 hard drive, I am only two hard disk or 4, or 8?

The above problem looks simple, as long as sufficient funds full match! Or say, now how many, buy much, not upgrade.

Indeed, the two approaches are quite reasonable. Then I do for HP engineers, from a technical and product perspective, what to do!

The 1 increase in CPU, if the WIN operating system, you may need to reinstall the operating system. If the LINUX operating system, you may need to re compile the kernel, compared with the operating system. At the same time, the double CPU and single CPU, interpolationmemory slots are different, if you are faced with 18 memory slots, you may feel dizzy!

2 memory upgrade, you may face because the purchase of different batches, and cause memory particles or batch of different manufacturers, but cannot enable memory multichannel service, multi-channel service can let your memory bandwidth and N times, in order to improve the efficiency of.

3 upgrade disk, you may face the risk of data loss. The HP HP server hard disk slots will bemany, especially the hard disk slot hot plug, you can always add a hard disk, without stopping. Don't open the chassis. Remember, this is a misleading propaganda, the actual situation is, the hot swap function is mainly used for range, replacement of damaged hard disk, in order to replace the hard disk is convenient, not to increase the hard disk is convenient.

You may be two block disk do RAID1, upgrade to the 4 block needs to change the arrayRAID5, upgrade to the 8 block, you may need to RAID6, even if you use the RAID1, or want to change, because the original RAID1 is two disc set, is now more disk set, increase harddisk may need to hard disk array to establish first removed before, array information change,equal to all the original all hard disk is formatted. If you risk do not delete the original RAID1 or RAID5, you need to back up all data, do the redo preparation. What if? In the event of, is. If a backup is not completely? Who will bear the risk?

Based on the above reasons, cannot but not to, do not upgrade CPU free, memory and hard disk! The above is based on the premise that you can buy the parts of the.

H3network.com is a world leading H3C (HP wholly owned subsidiary) networking

products distributor, we wholesale original new H3C networking equipments,

including H3C switches, H3C routers, H3C security products, H3C WLAN products, H3C

SFP and other H3C networking products. H3C was established in 2003 by Huawei and

3Com, focusing on IP-based products, now they are the No. 1 in China enterprise

networking market followed by No. 2 Cisco. H3C became a wholly owned subsidiary of

HP in 2010, they are the original developer of most HP switches and almost all HP

routers, included the most advanced router 8800 and most advanced switch 12500.

These H3C based re-branded HP products are using same software Comware as H3C,

so they have same configuration and command as H3C. Now H3C products are using

their original brand H3C in China while been re-branded to HP in global market. Compare to HP products, same function H3C products may help you save up to 35%

purchase cost. H3network.com keeps regular stock for all popular H3C products, so instead of wait for HP long delivery time, with us your JC694A  products may reach your city in 3 to 5 business days, we can ship to worldwide.

More information, please view: http://www.h3network.com